It is an integral part of any home. It is a protective structure for one of your homes. It opens either by hand or an electric motor. Garage doors can be damaged in many ways. For example, hitting them with your car or bicycle. If the garage door is damaged, you do not have to replace it.
You can replace your garage door yourself or hire professionals to do so. Bob’s Advance Garage Doors is a company that has been around for many years and provides excellent service.
The company can install and replace new doors, systems, and equipment in your home. They also handle panel replacement, repair, and maintenance. Garage Door Repair Cumming can also handle these types of issues.
This guide will help you understand how to replace a panel:
Garage doors are usually made up of at least six panels, but most have four. The panels are hinged together and use the entire length of the garage door.
Steps
Measure the Door Panel: You will need to measure the door panel’s length from one end to the other. Estimates are usually given in whale numbers. Also, you will need to measure your height. The most common sizes are 18, 21, and 24. Last but not least, you will need to determine the thickness of the panel.
Get the Brand Name—Most manufacturers place a sticker on the side of the panel bottom or top where the rollers and track meet. The sticker will have the following information: brand name, panel type, color, serial numbers, and rating. You should have a contact number or website where you can order parts.
Removing the Damaged Panel- After you’ve purchased a replacement garage door panel, it is best to remove your garage opener. This will ensure safety. A hoist is needed to attach it to the top of the garage track. The hoist’s other end is connected to the hook located above the damaged panel.
Using a vise-grip, you can find the wires connecting the brackets and panels. Two wires are used per door.
When removing panels, lift the garage door by 4 inches with a hoist. Use 2x4s, bricks, or another sound material to support its weight. Now, you can release the hinge panel. Start at the outside and then straight in the middle. You can replace the panel below by removing the damaged panel.
To replace a middle panel, you will need to remove the hinge bolts holding the damaged panel in place from the panel beneath it.
After removing the bolts, use a hoist and lift the panel away from the damaged part.
Install a New Panel -Place the new panel in the track and lower it into the panel beneath it. Reattach the hinge bolts and lower the upper portion of the door onto the new panel. Use vice grips on either side of the panel to hold it in place as you reattach the hinge to the bottom panel.
The Door Was Inspected. After finishing the job, remove all grips, attach the doors, and lift them. Your hinges should be bent correctly, and the panel size should match the rest.
The garage door repair Symrna will never charge you to inspect your door. It would be best if you only used the best garage repair Smyrna service providers. The free professional inspections are a testament to their excellence.
Garage door repair Cumming today isn’t outdated and can help you ensure your garage door functions properly. Garage Door Repair Cumming also offers a 24-hour service.
How much did it cost?
The cost depends on what you use and the type of material. It is usually less than 200 dollars.
Conclusion
Garage door repair Smyrna offers the best garage door replacement services.
